The Maxquarium 000 PPM De-Ionisation reverse osmosis system produces up to 500 liters per day (up to 20 liters per hour), designed for use in aquariums, aquoponics and hydroponics and for all growers who want to start with 000 ppm water.
Removes up to 95% of salts, heavy metals and other possible contaminants. Removes up to 99% of chlorine and reduces sediments larger than 5 microns instantly.
To achieve optimal water production conditions, you can use Pressure Pump Kit Powergrow and Maxquarium (422113) .
Benefits of Maxquarium 000 PPM
Reverse Osmosis systems are designed to minimize water waste to the drain with a ratio of approximately 2:1 (bad water/good water).
- Removes up to 95% of salts in the water.
- Less water waste than other equipment
- Easy indoor and outdoor installation
Helps stabilize pH, achieves 100% effectiveness of nutrients and fertilizers, and protects organisms. Ideal for organic crops.
Removes or Reduces: Salts, Heavy Metals, Chloramines, Nitrates, Nitrites, Chlorine, Sediments, Soil, Oxides, Herbicides and Pesticides, Volatile Organic Pollutants (Chemical Pollutants, Benzene, Oils, Trihalomethanes, Detergents, PCB’s)
How many liters per hour does the Maxquarium 000 PPM filter?
The Maxquarium 000 PPM provides 20 liters per hour, which is 500 liters per day. This is virtually distilled water which allows plants to absorb nutrients more easily and generate better yields.
Suitable conditions for using the Maxquarium 000 PPM
To guarantee the optimal functioning of the Maxquarium 000 PPM osmosis filter, the water pressure must be 4BAR. A pressure pump is recommended, which will also help to reduce the amount of water that is discharged into the drain.
Water conditions
- Temperature: 25ºC
- Pressure: Min. 3 Kg Max. 6kg
- Quality (500 tds or ppm)
Other conditions may reduce water production.
Filter changes should be made every 4,000 liters of osmosis water produced.
Pressure Pump Kit Powergrow and Maxquarium (422113) and spare parts to add to any reverse osmosis system when ultra pure 000 ppm water is required.
Use with Pump Kit
To get the most out of your osmosis system, it is recommended to use a pump kit, so that the pressure is maintained and you get the performance indicated by the manufacturer. These kits should be fitted to the osmosis water inlet.
For better performance you can also use a Buoy Kit, so that it sends a signal to the pump when it should stop working when the water reaches a certain level. This avoids spillage or overwatering.
Spare parts
It is recommended to change the filters every 4,000 liters of osmosis water produced. To set up your Maxquarium 000 PPM osmosis system you will need:
Bewertungen
Es gibt noch keine Bewertungen.